My Mudra Link Stops Working After About a Minute

If your Mudra Link stops working after a while when you are on Air-Touch mode  please do the following:

1. Forget or Remove the Mudra Link from your Bluetooth devices.
2. Reset the Link - in case your band is turned ON please power it off by pressing the button the until turned off. Then proceed to long press the button, you will see the LED flashing orange, continue pressing until the LED flashes red.
3. Power on the Link - press the button once, you should see the LED flashing orange.
4. Connect the Mudra Link again to your device through the Bluetooth settings.

If you're still experiencing issues, contact us at support@mudra-band.com